Detailed Product Description

  Please read carefully before using the goods

1.Make sure hat the specifio of inner tire fits the outer fire. Every inner tire has valve cap, screw cap and the plastic cap. Please  firstly check whether or not the space of inner tire has sand .

2.When fitting the outer and innertier with steel ring the follows must be done carefully; the valve tube is lockedon the steel ring correctly and it is shown outside the steel ring in order to make the pumping convenience. The Innertire is not clippe between the outer tire and teelring .


3.When fitting completey the inner and outer tire.Pump alittledir(less than 70kpa) into the inner tire and then stop check whether the inner and outer tire arelocked on the later, do the pumping According to the air pressure(shown on the side of outer tira )suggested by producer.Of the outer tire must be show chow completety outside the steel ring.


4.When fitting the outer and inner tire with steel ring please firstly check steel ring to make sure that there is no any short ages of thesteel ring,For example,there isnot distortion of the steel ring.


5.Do not pump too much or too little.This will lead to the separation between the valve cap and inner tire abd then cause accidents. Please check whether the air pressure is kep in a normal state.Check the valve cap to prevent.air ledkage and the valve